Breaking News

HiPath 4000-HiPath 4000V6 : IP Address and XML Files Planning

11:01 AM ,
HiPath4000 V6 : IP Address and XML Files Planning 

HiPath4000 cPCI Server (DSCXL2)
DSCXL2 : Simplex - Customer LAN and IPDA LAN are located in one subnet
DSCXL2 : Simplex - Customer LAN and IPDA LAN are located in separate subnets
DSCXL2 : Duplex - Customer LAN and IPDA LAN are located in one subnet.
DSCXL2 : Separate Duplex

HiPath4000 Standard Server
Standard Server : Simplex
Standard Server : Simplex with Integrated SoftGate
Standard Server : Separated Duplex

HiPath4000 IPDA
SoftGate / HiPath Access 500 -Standalone
SoftGate / HiPath Access 500 - Survivable
Access Point Emergency (APE)

Installation (.xml) file
Change IP Address according to Customer's Network
Change Portal IP Address : <entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change IPDA-CCB IP Address : <entry key="ipda-lan.ccb-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical IP Address : <entry key="bond0.ip.0">
Change DSCXL2 MAC Address : <entry key="mac-address">

Save finished template to USB drive /config with name as : firstinst-netw-<Customer Name>-<MAC Address>.xml

XML file name convention:
firstinst-netw-<hostname>-<mac-address>.xml
<hostname> = CustomerName-CCA => A=DSCXL2 node "A" where CCA resides in a duplex system
CustomerName-CCB => DSCXL2 "B"
CustomerName => Simplex Mono processor, one DSCXL2.
CustomerName-apeXX => for APE where xx = LTU/IPDA where dscxl2-APE resides
CustomerName-hpaXX => for HiPath Access 500 (HPA500 = AP500 = SG/LTU/IPDA)
CustomerName-sgXX => for SoftGate where xx = LTU/IPDA number

Note : 
An external NTP server must be used as an accurate time source.
As an exception a simplex without SPE feature can be used without any NTP server, however the Linux clock is then used which is not that accurate and the customer may experience/complain of clock drifts. To prevent this problem and avoid customer complaints an external NTP Server is always recommended.

Note : Netmask and Prefix Lengh

1128.0.0.0192.0.0.0224.0.0.0240.0.0.04
5248.0.0.0252.0.0.0254.0.0.0255.0.0.08
9255.128.0.0255.192.0.0255.224.0.0255.240.0.012
13255.248.0.0255.252.0.0255.254.0.0255.255.0.016
17255.255.128.0255.255.192.0255.255.224.0255.255.240.020
21255.255.248.0255.255.252.0255.255.254.0255.255.255.024
25255.255.255.128255.255.255.192255.255.255.224255.255.255.24028
29255.255.255.248255.255.255.252255.255.255.254255.255.255.25532


Example IP Address assignment.
 IP Address.xlsx


DSCXL2 Simplex : Customer LAN and IPDA LAN are located in one subnet

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">simplex</entry>
<entry key="customer-portal.ip">192.168.100.151/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.152/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.153/24</entry>
<entry key="atlantic-interface.0">eth6</entry>
<entry key="atlantic-interface.1">eth7</entry>
<entry key="ipda-interface">bond0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.154/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry>
<entry key="system.rtm-configured">1</entry>
</common>
<node1>
<entry key="mac-address">00-20-ce-df-bf-01</entry>
<entry key="customer-interface">bond0</entry>
<entry key="bond0.dev.0">eth0</entry>
<entry key="bond0.dev.1">eth2</entry>
<entry key="bond0.dev.2">eth4</entry>
<entry key="bond0.ip.0">192.168.100.150/24</entry>
<entry key="bond0.hostname.0">HP4KV6-DSCXL2-CCA</entry>
<entry key="bond0.domainname.0">tgs-enterprise.com</entry>
</node1>
</properties>

Change IP Address according to Customer's Network
Change Portal IP Address : <entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical (YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change IPDA Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g.firstinst-netw-SoftGate19-00-20-ce-df-bf-01.xml

DSCXL2 Simplex : Customer LAN and IPDA LAN are located in Separate Network

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
    <?xml version="1.0" encoding="UTF-8"?>
    <properties>
    <comment>Creat by Somchai</comment>
    <comment>Jan 14 10:00:00 CEST 2013</comment>
    <common>
    <entry key="system-deployment">simplex</entry>
    <entry key="customer-portal.ip">192.168.100.151/24</entry>
    <entry key="customer-lan.assistant-ip-address">192.168.100.152/24</entry>
    <entry key="customer-lan.csta-ip-address">192.168.100.153/24</entry>
    <entry key="atlantic-interface.0">eth6</entry>
    <entry key="atlantic-interface.1">eth7</entry>
    <entry key="ipda-interface">bond1</entry>
    <entry key="ipda-lan.cca-ip-address">192.168.200.151/24</entry>
    <entry key="ipda-lan.default-router-ipda">192.168.200.1</entry>
    <entry key="customer-ntp.server.0">0.0.0.0</entry>
    <entry key="customer-timezone">Asia/Bangkok</entry>
    <entry key="customer-keyboard-layout">english-us</entry>
    <entry key="customer-def.gw">192.168.100.1</entry>
    <entry key="system.rtm-configured">1</entry>
    </common>
    <node1>
    <entry key="mac-address">00-20-ce-df-bf-01</entry>
    <entry key="customer-interface">bond0</entry>
    <entry key="bond0.dev.0">eth0</entry>
    <entry key="bond0.dev.1">eth2</entry>
    <entry key="bond0.dev.2">eth4</entry>
    <entry key="bond0.ip.0">192.168.100.150/24</entry>
    <entry key="bond0.hostname.0">HP4KV6-DSCXL2-CCA</entry>
    <entry key="bond0.domainname.0">tgs-enterprise.com</entry>
    <entry key="ipda-interface">bond1</entry>
    <entry key="bond1.dev.0">eth1</entry>
    <entry key="bond1.dev.1">eth3</entry>
    <entry key="bond1.dev.2">eth5</entry>
    <entry key="bond1.ip.0">192.168.200.150/24</entry>
    <entry key="bond1.hostname.0">HP4KV6-DSCXL2-IPDA</entry>
    <entry key="bond1.domainname.0">tgs-enterprise.com</entry>
    </node1>
    </properties>

Change IP Address according to Customer Network
Change Portal IP Address : <entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g. : firstinst-netw-Simplex-00-20-ce-df-bf-01.xml

DSCXL2 : Duplex - Customer LAN and IPDA LAN are located in one subnet

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">duplex</entry>
<entry key="corosync-name.node1">HP4K-corosync-CCA</entry>
<entry key="corosync-ip.node1">10.0.187.1/24</entry>
<entry key="corosync-name.node2">HP4K-corosync-CCB</entry>
<entry key="corosync-ip.node2">10.0.187.2/24</entry>
<entry key="customer-portal.ip">192.168.100.151/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.152/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.153/24</entry>
<entry key="atlantic-interface.0">eth6</entry>
<entry key="atlantic-interface.1">eth7</entry>
<entry key="ipda-interface">bond0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.154/24</entry>
<entry key="ipda-lan.ccb-ip-address">192.168.100.155/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry>
<entry key="system.rtm-configured">1</entry>
</common>
<node1>
<entry key="mac-address">00-20-ce-f0-61-10</entry>
<entry key="customer-interface">bond0</entry>
<entry key="corosync-interface">bond1</entry>
<entry key="bond0.dev.0">eth0</entry>
<entry key="bond0.dev.1">eth2</entry>
<entry key="bond0.dev.2">eth4</entry>
<entry key="bond0.ip.0">192.168.100.150/24</entry>
<entry key="bond0.hostname.0">HP4K-Cust-CCA</entry>
<entry key="bond0.domainname.0">tgs-enterprise.com</entry>
<entry key="bond1.dev.0">eth1</entry>
<entry key="bond1.dev.1">eth3</entry>
<entry key="bond1.dev.2">eth5</entry>
<entry key="bond1.ip.0">10.0.187.1/24</entry>
<entry key="bond1.hostname.0">HP4K-corosync-CCA</entry>
<entry key="bond1.domainname.0">tgs-enterprise.com</entry>
<entry key="eth6.ip.0">0.0.0.0/0</entry>
<entry key="eth7.ip.0">0.0.0.0/0</entry>
</node1>
<node2>
<entry key="mac-address">00-20-ce-f1-2b-60</entry>
<entry key="customer-interface">bond0</entry>
<entry key="corosync-interface">bond1</entry>
<entry key="bond0.dev.0">eth0</entry>
<entry key="bond0.dev.1">eth2</entry>
<entry key="bond0.dev.2">eth4</entry>
<entry key="bond0.ip.0">192.168.100.149/24</entry>
<entry key="bond0.hostname.0">HP4K-Cust-CCB</entry>
<entry key="bond0.domainname.0">tgs-enterprise.com</entry>
<entry key="bond1.dev.0">eth1</entry>
<entry key="bond1.dev.1">eth3</entry>
<entry key="bond1.dev.2">eth5</entry>
<entry key="bond1.ip.0">10.0.187.2/24</entry>
<entry key="bond1.hostname.0">HP4K-corosync-CCB</entry>
<entry key="bond1.domainname.0">tgs-enterprise.com</entry>
<entry key="eth6.ip.0">0.0.0.0/0</entry>
<entry key="eth7.ip.0">0.0.0.0/0</entry>
</node2>
</properties>

Change IP Address according to Customer Network
Change Portal IP Address : <entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 Node1, Node2 MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change IPDA-CCB IP Address : <entry key="ipda-lan.ccb-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g.firstinst-netw-SoftGate19-00-20-ce-f0-61-10.xml

DSCXL2 : Separate Duplex

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">separated_duplex</entry>
<entry key="corosync-name.node1">HP4K-corosync-CCA</entry>
<entry key="corosync-ip.node1">10.0.187.1/24</entry>
<entry key="corosync-name.node2">HP4K-corosync-CCB</entry>
<entry key="corosync-ip.node2">10.0.187.2/24</entry>
<entry key="corosync-name.quorum">HP4K-Quorum-Server</entry>
<entry key="corosync-ip.quorum">10.0.187.3/24</entry>
<entry key="customer-portal.ip">192.168.100.151/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.152/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.153/24</entry>
<entry key="atlantic-interface.0">eth6</entry>
<entry key="atlantic-interface.1">eth7</entry>
<entry key="ipda-interface">bond0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.154/24</entry>
<entry key="ipda-lan.ccb-ip-address">192.168.100.155/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry></common>
<node1>
<entry key="mac-address">00-20-ce-f1-85-90</entry>
<entry key="customer-interface">bond0</entry>
<entry key="corosync-interface">bond1</entry>
<entry key="bond0.dev.0">eth0</entry>
<entry key="bond0.dev.1">eth2</entry>
<entry key="bond0.dev.2">eth4</entry>
<entry key="bond0.ip.0">192.168.101.150/24</entry>
<entry key="bond0.hostname.0">HP4K-Cust-CCA</entry>
<entry key="bond0.domainname.0">tgs-enterprise.com</entry>
<entry key="bond1.dev.0">eth1</entry>
<entry key="bond1.dev.1">eth3</entry>
<entry key="bond1.dev.2">eth5</entry>
<entry key="bond1.ip.0">10.0.187.1/24</entry>
<entry key="bond1.hostname.0">HP4K-corosync-CCA</entry>
<entry key="bond1.domainname.0">tgs-enterprise.com</entry>
<entry key="eth6.ip.0">0.0.0.0/0</entry>
<entry key="eth7.ip.0">0.0.0.0/0</entry>
</node1>
<node2>
<entry key="mac-address">00-20-ce-f0-61-10</entry>
<entry key="customer-interface">bond0</entry>
<entry key="corosync-interface">bond1</entry>
<entry key="bond0.dev.0">eth0</entry>
<entry key="bond0.dev.1">eth2</entry>
<entry key="bond0.dev.2">eth4</entry>
<entry key="bond0.ip.0">192.168.100.156/24</entry>
<entry key="bond0.hostname.0">HP4K-Cust-CCB</entry>
<entry key="bond0.domainname.0">tgs-enterprise.com</entry>
<entry key="bond1.dev.0">eth1</entry>
<entry key="bond1.dev.1">eth3</entry>
<entry key="bond1.dev.2">eth5</entry>
<entry key="bond1.ip.0">10.0.187.2/24</entry>
<entry key="bond1.hostname.0">HP4K-corosync-CCB</entry>
<entry key="bond1.domainname.0">tgs-enterprise.com</entry>
<entry key="eth6.ip.0">0.0.0.0/0</entry>
<entry key="eth7.ip.0">0.0.0.0/0</entry>
</node2>
<node3>
<entry key="mac-address">5c-f3-fc-2a-36-d9</entry>
<entry key="corosync-interface">eth1</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.101.157/24</entry>
<entry key="eth0.hostname.0">HP4K-Cust-Quorum</entry>
<entry key="eth0.domainname.0">tgs-enterprise.com</entry>
<entry key="eth1.ip.0">10.0.187.3/24</entry>
<entry key="eth1.hostname.0">HP4K-Quorum-Server</entry>
<entry key="eth1.domainname.0">tgs-enterprise.com</entry>
</node3>
</properties>

Change IP Address according to Customer Network
Change Portal IP Address :<entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 Node1, Node2, Node3 MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change IPDA-CCB IP Address : <entry key="ipda-lan.ccb-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g. : firstinst-netw-Sep_Duplex-00-20-ce-f1-85-90.xml

HiPath4000 Standard Server : Simplex

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8" ?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">simplex</entry>
<entry key="customer-portal.ip">192.168.100.161/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.162/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.163/24</entry>
<entry key="atlantic-interface.0">eth1</entry>
<entry key="ipda-interface">eth0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.164/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry>
<entry key="customer-def.gw.dev">eth0</entry>
</common>
<node1>
<entry key="mac-address">00-21-5e-6e-bc-cb</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.160/24</entry>
<entry key="eth0.hostname.0">HP4KV6-Server</entry>
<entry key="eth0.domainname.0">tgs-enterprise.com</entry>
<entry key="eth1.ip.0">0.0.0.0/0</entry>
</node1>
</properties>


Change IP Address according to Customer Network
Change Portal IP Address :<entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="eth0.ip.0">
Change Server MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g. : firstinst-netw-Server-00-21-5e-6e-bc-cb.xml

HiPath4000 Standard Server : Simplex with Integrated SoftGate

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8" ?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">simplex</entry>
<entry key="customer-portal.ip">192.168.100.161/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.162/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.163/24</entry>
<entry key="ipda-interface">eth0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.164/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="atlantic-interface.0">eth1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry>
<entry key="customer-def.gw.dev">eth0</entry>
<entry key="integrated-softgate">1</entry>
</common>
<node1>
<entry key="mac-address">00-21-5e-6e-bc-cb</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.160/24</entry>
<entry key="eth0.hostname.0">HP4KV6-SoftGate17</entry>
<entry key="eth0.domainname.0">tgs-enterprise.com</entry>
<entry key="eth1.ip.0">0.0.0.0/0</entry>
</node1>
</properties>

Change IP Address according to Customer Network
Change Portal IP Address :<entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change Server MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g. : firstinst-netw-ServerLTU17-00-21-5e-6e-bc-cb.xml

Installation (.xml) file for SoftGate

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<!-- initialcfg.xml -->
<softGateInitialConfiguration>
  <!-- general settings -->
  <!--Property name="lanRedundancy"  value="1" /-->
<Property name="lanInterface"   value="eth0" />
<Property name="slave0"         value="eth0" />
<Property name="slave1"         value="eth1" />
<Property name="initConfigLAN" value="0" />
<Property name="lanRedundancy" value="0" />
<Property name="lanInterface" value="eth0" />
<Property name="ethLinkMode" value="36" />
<!-- NCUI base address (= payload/only for IPDA direct link) -->
<Property name="ipAddrEth" value="192.168.100.170" />
<Property name="netmaskEth" value="255.255.255.0" />
<Property name="mtuSizeEth" value="1500" />
<Property name="vlanTag" value="0" />
<Property name="vlanId" value="0" />
<Property name="defaultGateway" value="192.168.100.1" />
<!-- NCUI signaling address (for direct link, identical with NCUI base address for IPDA networking) -->
<Property name="ipAddrSig" value="192.168.200.17" />
<Property name="netmaskSig" value="255.255.255.240" />
<Property name="serverPortSig" value="4000" />
<Property name="tosLan" value="104" />
<Property name="ipAddrCCA" value="192.168.100.164" />
<Property name="ipAddrCCB" value="0.0.0.0" />
<Property name="ipAddrCCC" value="0.0.0.0" />
<Property name="ltu" value="17" />
</softGateInitialConfiguration>

Change IPDA IP Address according to Customer's Network
Change NCUI (Payload) IP Address : <Property name="ipAddrEth" value="xxx.xxx.xxx.xxx" />
Change NCUI Netmask Address : <Property name="netmaskEth" value="xxx.xxx.xxx.xxx" />
Change Default Gateway IP Address : <Property name="defaultGateway" value="xxx.xxx.xxx.xxx" />
Change NCUI (Signalling) IP Address : <Property name="ipAddrSig" value="xxx.xxx.xxx.xxx" />
Change NCUI Netmask Address : <Property name="netmaskSig" value="xxx.xxx.xxx.xxx" />
Change IPDA CCA IP Address : <Property name="ipAddrCCA" value="xxx.xxx.xxx.xxx" />
Change LTU Number : <Property name="ltu" value="xx" />

Save .xml file to USB Drive directory /config
As File name : initialcfg-Name-MAC Address.xml
e.g. : initialcfg-ServerLTU17-00-21-5e-6e-bc-cb.xml

HiPath4000 Standard Server : Separated Duplex

IP Address PlaningImage

Installation (.xml) file

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<comment>Wed Oct 10 08:07:47 CEST 2012</comment>
<common>
<entry key="system-deployment">separated_duplex</entry>
<entry key="corosync-name.node1">HP4K-corosync-CCA</entry>
<entry key="corosync-ip.node1">10.0.187.1/24</entry>
<entry key="corosync-name.node2">HP4K-corosync-CCB</entry>
<entry key="corosync-ip.node2">10.0.187.2/24</entry>
<entry key="corosync-name.quorum">HP4K-Quorum-Server</entry>
<entry key="corosync-ip.quorum">10.0.187.3/24</entry>
<entry key="customer-portal.ip">192.168.100.161/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.162/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.163/24</entry>
<entry key="atlantic-interface.0">eth2</entry>
<entry key="ipda-interface">eth0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.164/24</entry>
<entry key="ipda-lan.ccb-ip-address">192.168.100.165/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry></common>
<node1>
<entry key="mac-address">00-21-5e-6e-bc-cb</entry>
<entry key="corosync-interface">eth1</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.160/24</entry>
<entry key="eth0.hostname.0">HP4K-Cust-CCA</entry>
<entry key="eth0.domainname.0">tgs.com</entry>
<entry key="eth1.ip.0">10.0.187.1/24</entry>
<entry key="eth1.hostname.0">HP4K-corosync-CCA</entry>
<entry key="eth1.domainname.0">tgs.com</entry>
</node1>
<node2>
<entry key="mac-address">34-40-b5-88-ed-79</entry>
<entry key="corosync-interface">eth1</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.166/24</entry>
<entry key="eth0.hostname.0">HP4K-Cust-CCB</entry>
<entry key="eth0.domainname.0">tgs.com</entry>
<entry key="eth1.ip.0">10.0.187.2/24</entry>
<entry key="eth1.hostname.0">HP4K-corosync-CCB</entry>
<entry key="eth1.domainname.0">tgs.com</entry>
</node2>
<node3>
<entry key="mac-address">5c-f3-fc-2a-36-d9</entry>
<entry key="corosync-interface">eth1</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.167/24</entry>
<entry key="eth0.hostname.0">HP4K-Cust-Quorum</entry>
<entry key="eth0.domainname.0">tgs.com</entry>
<entry key="eth1.ip.0">10.0.187.3/24</entry>
<entry key="eth1.hostname.0">HP4K-Quorum-Server</entry>
<entry key="eth1.domainname.0">tgs.com</entry>
</node3>
</properties>

Change IP Address according to Customer Network
Change Portal IP Address :<entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 MAC Address : <entry key="mac-address">

IPDA Network
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change IPDA-CCB IP Address : <entry key="ipda-lan.ccb-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g. : firstinst-netw-Server_Sep_Duplex-00-21-5e-6e-bc-cb.xml

HiPath4000 IPDA : SoftGate / HiPath Access 500 -Standalone (direct link)

IP Address PlaningImage

NOTE: HiPath 4000 Platform Administration (Portal) configuration is optional in some deployments. If the IP address for HiPath 4000 Platform Administration (Portal) is not configured it can be reach on the NCUI IP address: https://<ncui_ip_address>:8443

Installation (.xml) file.

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">standalone_softgate</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry>
<entry key="integrated-softgate">1</entry>
</common>
<node1>
<entry key="mac-address">00-50-56-1a-2a-19</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.190/24</entry>
<entry key="eth1.ip.0">0.0.0.0/0</entry>
<entry key="eth0.hostname.0">SoftGate19</entry>
<entry key="eth0.domainname.0">tgs-enterprise.com</entry>
</node1>
</properties>

Change IP Address according to Customer Network
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="eth0.ip.0">
Change SoftGate / HiPath Access MAC Address : <entry key="mac-address">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml 
e.g. : firstinst-netw-SoftGate19-00-50-56-1a-2a-19.xml

Installation (.xml) file for SoftGate / HiPath Access

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<!-- initialcfg.xml -->
<softGateInitialConfiguration>
  <!-- general settings -->
  <!--Property name="lanRedundancy"  value="1" />
<Property name="lanInterface"   value="eth0" />
<Property name="slave0"         value="eth0" />
<Property name="slave1"         value="eth1" />
<Property name="ethLinkMode"    value="0" /-->
  <Property name="initConfigLAN" value="0" />
  <Property name="lanRedundancy" value="0" />
  <Property name="lanInterface" value="eth0" />
  <Property name="ethLinkMode" value="36" />
  <!-- NCUI base address (= payload/only for IPDA direct link) -->
  <Property name="ipAddrEth" value="192.168.100.196" /> 
  <Property name="netmaskEth" value="255.255.255.0" />
  <Property name="mtuSizeEth" value="1500" />
  <Property name="vlanTag" value="0" />
  <Property name="vlanId" value="0" />
  <Property name="defaultGateway" value="192.168.100.1" /> 
  <!-- NCUI signaling address (for direct link, identical with NCUI base address for IPDA networking) -->
  <Property name="ipAddrSig" value="192.168.200.19" />
  <Property name="netmaskSig" value="255.255.255.240" />
  <Property name="serverPortSig" value="4000" />
  <Property name="tosLan" value="104" />
  <Property name="ipAddrCCA" value="192.168.100.154" />
  <Property name="ipAddrCCB" value="0.0.0.0" /> 
  <Property name="ipAddrCCC" value="0.0.0.0" />
  <Property name="ltu" value="19" />
</softGateInitialConfiguration>

Change IPDA IP Address according to Customer Network

Change NCUI (Payload) IP Address : <Property name="ipAddrEth" value="xxx.xxx.xxx.xxx" />
Change NCUI Netmask Address : <Property name="netmaskEth" value="xxx.xxx.xxx.xxx" />
Change Default Gateway IP Address : <Property name="defaultGateway" value="xxx.xxx.xxx.xxx" />
Change NCUI (Signalling) IP Address : <Property name="ipAddrSig" value="xxx.xxx.xxx.xxx" />
Change NCUI Netmask Address : <Property name="netmaskSig" value="xxx.xxx.xxx.xxx" />
Change IPDA CCA IP Address : <Property name="ipAddrCCA" value="xxx.xxx.xxx.xxx" />
Change LTU Number : <Property name="ltu" value="xx" />

Note : For IPDA Network Link, NCUI (Payload) IP Address and NCUI (Signalling) IP Address is the same address.

Save .xml file to USB Drive directory /config
As File name : initialcfg-Name-MAC Addresss.xml 
e.g. : initialcfg-SoftGate19-00-50-56-1a-2a-19.xml

HiPath4000 IPDA : SoftGate / HiPath Access 500 - Survivable

IP Address PlaningImage

Installation (.xml) file for APE

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<comment>Creat by Somchai</comment>
<comment>Jan 14 10:00:00 CEST 2013</comment>
<common>
<entry key="system-deployment">survivable_softgate</entry>
<entry key="customer-portal.ip">192.168.100.155/24</entry>
<entry key="customer-lan.assistant-ip-address">192.168.100.156/24</entry>
<entry key="customer-lan.csta-ip-address">192.168.100.157/24</entry>
<entry key="ipda-interface">eth0</entry>
<entry key="ipda-lan.cca-ip-address">192.168.100.158/24</entry>
<entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
<entry key="customer-ntp.server.0">0.0.0.0</entry>
<entry key="customer-timezone">Asia/Bangkok</entry>
<entry key="customer-keyboard-layout">english-us</entry>
<entry key="customer-def.gw">192.168.100.1</entry>
<entry key="ccap-number">18</entry>
</common>
<node1>
<entry key="mac-address">00-1a-e8-3c-f4-b0</entry>
<entry key="customer-interface">eth0</entry>
<entry key="eth0.ip.0">192.168.100.169/24</entry>
<entry key="eth0.hostname.0">HPA500-APE-LTU18</entry>
<entry key="eth0.domainname.0">tgs-enterprise.com</entry>
</node1>
</properties>

Change IP Address according to Customer Network
Change Portal IP Address : <entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 MAC Address : <entry key="mac-address">

IPDA Network
Change APE LTU Number : <entry key="ccap-number">
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml
e.g. : firstinst-netw-HPA500_APE-00-1a-e8-3c-f4-b0.xml

Installation (.xml) file for SoftGate / HiPath Access

CODE: SELECT ALL
<?xml version="1.0" encoding="UTF-8"?>
<!-- initialcfg.xml -->
<softGateInitialConfiguration>
  <!-- general settings -->
  <!--Property name="lanRedundancy"  value="1" /-->
<Property name="lanInterface"   value="eth0" />
<Property name="slave0"         value="eth0" />
<Property name="slave1"         value="eth1" />
<Property name="initConfigLAN" value="0" />
<Property name="lanRedundancy" value="0" />
<Property name="lanInterface" value="eth0" />
<Property name="ethLinkMode" value="36" />
<!-- NCUI base address (= payload/only for IPDA direct link) -->
<Property name="ipAddrEth" value="192.168.100.180" />
<Property name="netmaskEth" value="255.255.255.0" />
<Property name="mtuSizeEth" value="1500" />
<Property name="vlanTag" value="0" />
<Property name="vlanId" value="0" />
<Property name="defaultGateway" value="192.168.100.1" />
<!-- NCUI signaling address (for direct link, identical with NCUI base address for IPDA networking) -->
<Property name="ipAddrSig" value="192.168.200.18" />
<Property name="netmaskSig" value="255.255.255.240" />
<Property name="serverPortSig" value="4000" />
<Property name="tosLan" value="104" />
<Property name="ipAddrCCA" value="192.168.100.164" />
<Property name="ipAddrCCB" value="0.0.0.0" />
<Property name="ipAddrCCC" value="0.0.0.0" />
<Property name="ltu" value="18" />
</softGateInitialConfiguration>

Change IPDA IP Address according to Customer Network
Change NCUI (Payload) IP Address : <Property name="ipAddrEth" value="xxx.xxx.xxx.xxx" />
Change NCUI Netmask Address : <Property name="netmaskEth" value="xxx.xxx.xxx.xxx" />
Change Default Gateway IP Address : <Property name="defaultGateway" value="xxx.xxx.xxx.xxx" />
Change NCUI (Signalling) IP Address : <Property name="ipAddrSig" value="xxx.xxx.xxx.xxx" />
Change NCUI Netmask Address : <Property name="netmaskSig" value="xxx.xxx.xxx.xxx" />
Change IPDA CCA IP Address : <Property name="ipAddrCCA" value="xxx.xxx.xxx.xxx" />
Change LTU Number : <Property name="ltu" value="xx" />

Note : For IPDA Network Link, NCUI (Payload) IP Address and NCUI (Signalling) IP Address is the same address.

Save .xml file to USB Drive directory /config
As File name : initialcfg-Name-MAC Address.xml
e.g. : initialcfg-HPA500-00-1a-e8-3c-f4-b0.xml

HiPath4000 IPDA : Access Point Emergency (APE)

IP Address PlaningImage

Installation (.xml) file.

CODE: SELECT ALL
    <?xml version="1.0" encoding="UTF-8"?>
    <properties>
    <comment>Creat by Somchai</comment>
    <comment>Jan 14 10:00:00 CEST 2013</comment>
    <common>
    <entry key="system-deployment">ape</entry>
    <entry key="customer-portal.ip">192.168.100.155/24</entry>
    <entry key="customer-lan.assistant-ip-address">192.168.100.156/24</entry>
    <entry key="customer-lan.csta-ip-address">192.168.100.157/24</entry>
    <entry key="atlantic-interface.0">eth6</entry>
    <entry key="atlantic-interface.1">eth7</entry>
    <entry key="ipda-interface">bond0</entry>
    <entry key="ipda-lan.cca-ip-address">192.168.100.158/24</entry>
    <entry key="ipda-lan.default-router-ipda">192.168.100.1</entry>
    <entry key="customer-ntp.server.0">0.0.0.0</entry>
    <entry key="customer-timezone">Asia/Bangkok</entry>
    <entry key="customer-keyboard-layout">english-us</entry>
    <entry key="customer-def.gw">192.168.100.1</entry>
    <entry key="ccap-number">21</entry>
    </common>
    <node1>
    <entry key="mac-address">00-20-ce-f1-92-c0</entry>
    <entry key="bond0.dev.0">eth0</entry>
    <entry key="bond0.dev.1">eth2</entry>
    <entry key="bond0.dev.2">eth4</entry>
    <entry key="customer-interface">bond0</entry>
    <entry key="eth6.ip.0">0.0.0.0/0</entry>
    <entry key="eth7.ip.0">0.0.0.0/0</entry>
    <entry key="bond0.ip.0">192.168.100.159/24</entry>
    <entry key="bond0.hostname.0">HP4K-APE21</entry>
    <entry key="bond0.domainname.0">tgs-enterprise.com</entry>
    </node1>
    </properties>

Change IP Address according to Customer's Network
Change Portal IP Address : <entry key="customer-portal.ip">
Change Assistant IP Address : <entry key="customer-lan.assistant-ip-address">
Change CSTA IP Address : <entry key="customer-lan.csta-ip-address">
Change NTP Server IP Address : <entry key="customer-ntp.server.0">
Change Default Gateway IP Address : <entry key="customer-def.gw">
Change Physical(YaST) IP Address : <entry key="bond0.ip.0">
Change DSCXL2 MAC Address : <entry key="mac-address">

IPDA Network
Change APE LTU Number : <entry key="ccap-number">
Change IPDA-CCA IP Address : <entry key="ipda-lan.cca-ip-address">
Change Default Gateway IP Address : <entry key="ipda-lan.default-router-ipda">

Save .xml file to USB Drive directory /config
As File name : firstinst-netw-Name-MAC Address.xml
e.g. : firstinst-netw-APE21-00-20-ce-f1-92-c0.xml

No comments

Subscribe to: Post Comments ( Atom )